Infiniti QX60 Oil Capacity & Transmission Fluid Capacity

EnginesWork.com is reader-supported. When you buy through our links, we may earn an affiliate commission at no added cost to you. Read more

The engine oil viscosity or thickness changes with temperature. Because of this, it is important to select the engine oil viscosity based on the temperatures at which the vehicle will be operated before the next oil change. Choosing an oil viscosity other than that recommended could cause serious engine damage.

 

2013 2014 2015 2016 2017 2018 2019 2020 2021 Infiniti QX60 Transmission Fluid Capacity

Transmission Fluid Capacity Fluid Type
RE0F10J Automatic Transmission Total Fill 9.3 quarts (8.8 liters) VTF12
RE0F02H Automatic Transmission Total Fill 6.2 quarts (5.9 liters) VTF12
RE0F10E Automatic Transmission Total Fill 9.3 quarts (8.8 liters) VTF12

 

2013 2014 2015 2016 2017 2018 2019 2020 2021 Infiniti QX60 Oil Capacity

Engine Oil capacity (with filter) Oil type (viscosity grade)
3.0L 6-cyl Engine [E] VR30DDTT Turbo

AWD, With filter 6.2 quarts (6 L)

RWD, With filter 5.6 quarts (5.4 L)

0W-20
3.0L 6-cyl Engine [F] VR30DDTT Turbo

AWD, With filter 6.2 quarts (6 L)

RWD, With filter 5.6 quarts (5.4 L)

0W-20
3.5L 6-cyl Engine VQ35DD 5.1 quarts (4.8 L) 0W-20
2.5L 4-cyl Engine QR25DER 6.1 quarts (5.8 L) 0W-20
3.5L 6-cyl Engine VQ35DE 5.1 quarts (4.8 L) 0W-20

 

How Much Oil Does an Infiniti QX60 Take?

The 2021 Infiniti QX60 with the 3.5L 6-cyl engine (engine code VQ35DD) takes 5.1 quarts (with filter) of 0W-20 synthetic oil. A new oil filter and a crush washer are required.

The oil and oil filter change intervals for your engine are based on the use of the specified quality oils and filters. Using engine oil and filters that are not of the specified quality, or exceeding recommended oil and filter change intervals could reduce engine life.

Damage to the engine caused by improper maintenance or use of incorrect oil and filter quality and/or viscosity is not covered by the INFINITI New Vehicle Limited Warranty.

Your engine was filled with high-quality engine oil when it was built. You do not have to change the oil before the first recommended change interval. Oil and filter change intervals depend upon how you use your vehicle.

It is essential to choose the correct grade, quality and viscosity engine oil to ensure satisfactory engine life and performance. For additional information, refer to “Recommended fluids/lubricants and capacities” in this section. INFINITI recommends the use of energy-conserving oil in order to improve fuel economy.

Select only engine oils that meet the American Petroleum Institute (API) certification or International Lubricant Standardization and Approval Committee (ILSAC) certification and SAE viscosity standard. These oils have the API certification mark on the front of the container. Oils that do not have the specified quality label should not be used as they could cause engine damage




Was this article helpful?
YesNo

Leave a Comment

Your email address will not be published.

Scroll to Top