Maintaining your 2014 Toyota Camry’s engine oil is essential for the longevity and performance of your vehicle. Selecting the appropriate oil type ensures the engine’s optimal performance, fuel economy, and smooth starting in cold weather. This article will provide you with essential information on the oil type and capacity for the 2.5 L 4-cylinder (2AR-FE) and the 3.5 L V6 (2GR-FE) engines and the recommended oil grade and viscosity.
What Kind Of Oil Does a 2014 Toyota Camry Take?
Your Toyota Camry is designed to use “Toyota Genuine Motor Oil” or an equivalent oil that meets the following grade and viscosity requirements:
3.5 L V6 (2GR-FE) engine:
- Oil grade: ILSAC multigrade engine oil
- Recommended viscosity: SAE 5W-30
SAE 5W-30 is the optimal choice for good fuel economy and smooth cold-weather starting. If SAE 5W-30 is unavailable, SAE 10W-30 oil may be used temporarily, but ensure to replace it with SAE 5W-30 at your next oil change.
2.5 L 4-cylinder (2AR-FE) engine:
- Oil grade: ILSAC GF-5 multigrade engine oil
- Recommended viscosity: SAE 0W-20
SAE 0W-20 is the optimal choice for achieving good fuel economy and reliable starting in cold weather conditions. If SAE 0W-20 is unavailable, you may use SAE 5W-20 oil as a temporary alternative. However, make sure to replace it with SAE 0W-20 during your next oil change.
Best Motor Oil For 2014 Toyota Camry
- ADVANCED PROTECTION AGAINST the four main causes of engine breakdown: wear friction heat and deposits
- 40% BETTER WEAR PROTECTION vs. industry standard as tested in the Sequence IVB engine test
- 25% BETTER DEPOSIT PROTECTION with superior engine cleaning detergents as tested in the GMOD engine test
- EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your motor no matter the weather conditions
- Mobil 1 High Mileage full-synthetic motor oil 0W-20 is designed for engines with over 75,000 miles to go up to 10,000 miles between oil changes.*
- Utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)
- For new Toyota and Scion purchases, use 0W-20 oil for all oil changes
- With the new 0W-20 oil you only needchange your oil every 10,000 miles12 months, dependingoperating conditions
- Reduced environmental burdenrecycling and disposalwaste oil
- Enhanced engine protection, wide variety operating temperatures
Oil Capacity (Drain and Refill)
For the 2014 Toyota Camry, the oil capacity varies depending on the engine type and whether you are changing the oil with or without a filter:
- 2.5 L 4-cylinder (2AR-FE) engine: 4.6 qt. (4.4 L, 3.9 Imp. qt.)
- 3.5 L V6 (2GR-FE) engine: 6.4 qt. (6.1 L, 5.4 Imp. qt.)
- 2.5 L 4-cylinder (2AR-FE) engine: 4.2 qt. (4.0 L, 3.5 Imp. qt.)
- 3.5 L V6 (2GR-FE) engine: 6.0 qt. (5.7 L, 5.0 Imp. qt.)
When changing the engine oil, warm up the engine and turn it off. Wait more than 5 minutes, then check the dipstick’s oil level to ensure the correct oil quantity.
Selecting the correct oil type and following the recommended oil capacity guidelines are crucial for maintaining your 2014 Toyota Camry’s engine performance and longevity. By using the recommended ILSAC GF-5 multigrade engine oil with a viscosity of SAE 0W-20, you can ensure that your vehicle operates at its best while achieving optimal fuel economy and cold-weather starting capabilities. Remember to change the oil regularly and use the appropriate oil capacity based on your Camry’s engine type and whether you are changing the oil with or without a filter.
Does a 2014 Toyota Camry Need Full Synthetic Oil?
Although the 2014 Toyota Camry does not explicitly require full synthetic oil, it is highly recommended. The recommended oil for the 2014 Camry is SAE 0W-20, which is typically a full synthetic oil. Compared to conventional oil, full synthetic oil offers better engine protection, improved fuel economy, and enhanced cold-weather starting capabilities. Using full synthetic oil in your Camry will help maintain optimal engine performance and longevity.
The information provided in this article is intended for informational and educational purposes only and should not be construed as professional mechanical advice. While the author has made every effort to ensure the accuracy and completeness of the information in this article, we make no warranties or representations as to the accuracy, completeness, reliability, or suitability of the information provided.
Engineswork.com participates in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. As an Amazon Associate, we earn from qualifying purchases.
Last update on 2024-02-28 / Affiliate links / Images from Amazon Product Advertising API