The engine oil must be changed at the intervals specified in the Warranty & Maintenance Booklet. This is very important because the lubrication function of the oil gradually declines during regular vehicle operation.
The engine oil should be changed more frequently under certain circumstances. Have the oil changed more frequently if you often drive short distances, your vehicle is predominantly in stop-and-go traffic situations, is in very dusty environments, or is operated for long periods of time in temperatures below zero.
We recommend having the oil changed at an authorized Audi dealer or authorized Audi Service Facility.
1998 1999 2000 2001 2002 2003 2004 2005 Audi TT Engine Oil Capacity
| Engine | Engine Oil Capacity | Oil type (viscosity grade) |
| 1.8L 4-cyl Engine [C] AMB AWP Turbo | 4.8 quarts (4.5 L) | 5W-40, 5W-30, 0W-40, 0W-30 |
| 1.8L 4 -cyl Engine BEA Turbo | 4.8 quarts (4.5 L) | 5W-40, 5W-30, 0W-40, 0W-30 |
| 3.2L 6 -cyl Engine BHE | 5.8 quarts (5.5 L) | 5W-40, 5W-30, 0W-40, 0W-30 |
Add 0.5L (0.5 qt) less than the capacity shown, start the engine, and let it run until the operating temperature is approx. 60 C (140 F), switch the engine off, wait 3 minutes, check the dipstick, fill to full mark as indicated on the dipstick. It may be more or less than 0.5L(0.5qt), depending on the model.
2006 2007 2008 2009 2010 2011 2012 2013 Audi TT Engine Oil Capacity
| Engine | Engine Oil Capacity with filter | Oil type (viscosity grade) |
| 2.0L 4-cyl Engine CETA Turbo | 4.8 quarts (4.5 L) | 5W-40, 5W-30, 0W-40, 0W-30 |
| 2.5L 5-cyl Engine CEPB Turbo | 6.9 quarts (6.5 L) | 5W-40, 5W-30, 0W-40, 0W-30 |
| 2.0L 4 -cyl Engine CDMA Turbo | 4.8 quarts (4.5 L) | 5W-40, 5W-30, 0W-40, 0W-30 |
If synthetic oil that meets the applicable Audi, and Volkswagen oil quality standards with the recommended viscosity grade is not available in your area, be sure to use a viscosity grade suitable for the climate, season, and operating conditions that exist where the vehicle is used. Make sure the oil meets the Audi, and Volkswagen oil quality standards listed.
2014 2015 2016 2017 2018 2019 2020 2021 Audi TT Engine Oil Capacity
| Engine | Engine Oil Capacity with filter | Oil type (viscosity grade) |
| 2.0L 4 -cyl Engine DHHA Turbo | 6 quarts (5.8 L) | 0W-20 |
| 2.5L 5 -cyl Engine DAZA Turbo | 7.5 quarts (7.3 L) | 0W-30 |
| 2.0L 4 -cyl Engine DLRA Turbo | 6 quarts (5.8 L) | 0W-30 |
Do not mix any additives with the engine oil. Additives may cause engine damage that is not covered by your New Vehicle Limited Warranty.
The engine oil consumption may be up to 0.5 quart/600 miles (0.5 liter/1,000 km), depending on driving style and operating conditions.
Consumption may be higher during the first 3,000 miles (5,000 km). The engine oil level must be checked regularly. It is best to check each time you refuel your vehicle and before long drives.
- Because of the lubrication and cooling of the engine, combustion engines consume oil. The oil consumption varies depending on the engine and may change during the engine’s service life. Engines generally consume more oil at the beginning during the break-in period. Then oil consumption stabilizes after the break-in period.
- Under normal conditions, oil consumption depends on the quality and viscosity of the oil, the engine RPM, the climate conditions, and the road conditions. The dilution of oil from condensation or fuel residue, as well as the age of the oil, also play a role. Because engine wear increases with mileage, oil consumption will increase again over time until it may be necessary to replace worn components.
- Because all these variables play a role, it is not possible to define an oil consumption standard. Therefore, the oil level must be checked regularly.
- If you believe that your engine has increased its oil consumption, contact an authorized Audi dealer or authorized Audi Service Facility to determine the cause.
Please note that an exact oil consumption measurement must be done with the necessary care and accuracy and may take time. An authorized Audi dealer or authorized Audi Service Facility is trained in accurately measuring the oil consumption.
