Subaru Ascent Oil Capacity And Oil Type is reader-supported. When you buy through our links, we may earn an affiliate commission at no added cost to you. Read more

The best motor oil for Subaru Ascent is not easy to find. There are many different brands and types of oil, so it’s best to do your research before you buy anything. In this article, we will explore some important considerations when shopping for the best motor oil for your new Subaru Ascent.

Motor oil is the lifeblood of any engine. It provides lubrication for moving parts, including pistons, bearings, and piston rings. A car’s engine can be likened to a heart – without good oil, the engine will eventually die. Motor oils are rated by their viscosity grade or how thick they are at low temperatures. The best motor oils for Subaru Ascent are typically in the 0W-20 range because they provide excellent cold weather protection while also being thinner than thicker grades like 10W-30 or 15W-40 that can get too thick at lower temperatures which would reduce fuel economy and increase wear on vital components over time.

2019 2020 2021 2022 Subaru Ascent Oil Capacity And Oil Type

Engine 2.4L 4-cyl FA24 Turbo engine
Oil capacity with filter 4.8 quarts (4.5 liters)
Oil type 0W-20
Oil drain plug torque 31 ft/lbs

How Much Oil Does A Subaru Ascent Take?

New Subaru Ascent takes 4.5 quarts of 0W-20 oil with a filter. Be sure to use a high-quality, Subaru-approved oil and oil filter. A properly trained expert should conduct this operation. It is suggested that you have your SUBARU dealer perform this service. Remove the oil cap from the engine’s filler neck and slowly pour fresh oil into the engine. You must use a level gauge to confirm that the oil level is correct after adding oil to the engine.

When To Change The Oil In A Subaru Ascent?

The best time to change the oil in your Subaru Ascent is every 7000 miles or every six months, whichever comes first. However, if you regularly drive your car hard or tow heavy loads, you may need to change the oil more often. Consult your owner’s manual for more information on how frequently to change the oil in your specific vehicle.

What Kind Of Oil Does A Subaru Ascent Take?

Subaru recommends using 0W-20 synthetic motor oil in all of its vehicles. This grade of oil is thinner than traditional motor oils which helps it circulate better at low temperatures.

Synthetic Oil

Oil viscosity (thickness) has an impact on fuel efficiency. Fuel economy is better with lower-viscosity oils. However, in order for the engine to efficiently lubricate itself, it must use oil of greater viscosity.

Synthetic engine oil that fulfills the same standards as conventional engine oil should be used. When using synthetic oil, you must use oils of the same classification, viscosity, and grade.

Was this article helpful?

Leave a Comment

Your email address will not be published.

Scroll to Top