The best motor oil for Mercedes-Benz S63 AMG is Mobil 1 5W-40 Synthetic Motor Oil. It meets the requirements of MB 229.3, API SL, and ILSAC GF-5 in addition to meeting or exceeding all Mercedes-Benz factory specifications. It also provides excellent corrosion protection and outstanding wear protection which are two crucial factors when deciding on the best motor oil for your vehicle.
2021 2022 Mercedes-Benz S63 AMG Engine Oil Capacity
| Engine type | 4.0L 8-cyl 177.980 Turbo engine |
| Engine Oil Capacity with filter | 9.5 quarts (9 liters) |
| Oil type | 0W-40, 5W-40 |
| Oil pan drain plug tightening torque | Metal – 22 ft/lbs. Plastic – 3 ft/lbs |
2014 2015 2016 2017 2018 2019 2020 Mercedes-Benz S63 AMG Engine Oil Capacity
| Engine type | 2014-2016 5.5L 8-cyl 157.985 Turbo | 2017-2020 5.5L 8-cyl 157.985 Turbo | 2017-2022 4.0L 8-cyl 177.980 |
| Engine Oil Capacity with filter | 9 quarts (8.5 liters) | 9 quarts (8.5 liters) | 9.5 quarts (9 liters) |
| Oil type | 0W-40, 5W-40 | 0W-40, 5W-40 | 0W-40, 5W-40 |
| Oil pan drain plug tightening torque | M12 bolt – 15 ft/lbs. 14 MM Plug – 22 ft/lbs. Plastic – 3 ft/lbs | M12 bolt – 15 ft/lbs. 14 MM Plug – 22 ft/lbs. Plastic – 3 ft/lbs | Metal – 22 ft/lbs. Plastic – 3 ft/lbs |
2006 2007 2008 2009 2010 2011 2012 2013 Mercedes-Benz S63 AMG Engine Oil Capacity
| Engine type | 2006-2010 6.3L 8-cyl DOHC | 2011-2013 5.5L 8-cyl 157.980 Turbo |
| Engine Oil Capacity with filter | 9.3 quarts (8.8 liters) | 9 quarts (8.5 liters) |
| Oil type | 0W-40, 5W-40 | 0W-40, 5W-40 |
| Oil pan drain plug tightening torque | 22 ft/lbs | M12 bolt – 15 ft/lbs |
How Much Oil Does A Mercedes-Benz S63 AMG Take?
The 9 quarts (8.5 liters) of 5W-40 fully comply with the specification for the S63 AMG (M157. 980 – 400kW) (221 Series – S Class) (PT) and is the ideal lubricant for this car. W223 takes 9.5 quarts (9 liters) of 5W-40 oil with a filter.
It is recommended to use oils with the lowest SAE viscosity classes, as described further (lowest SAE viscosity class in each case; observe possible restrictions of the approved SAE viscosity classes). For the sake of reducing fuel consumption, it’s advised to adhere to the engine oil requirements listed in the table for the lowest SAE viscosity category. It is necessary to be cautious when using this supplement.
The basic rule of thumb is that an engine’s oil should be changed every 3000 miles to keep it running properly and to extend its life. The traditional “3 Months or 3000 Miles” service interval is no longer necessary in most modern cars. It may be several times that, but at least once a year is suggested, regardless of how little you drive.
Do not use engine oils or oil filters that do not match the requirements outlined in the service schedule.
