If you’re the owner of a Mercedes-Benz CLS450, it’s important to know the Engine Oil Capacity. The Mercedes-Benz CLS450 takes 9 quarts of SAE 0W-30 motor oil. Mercedes-Benz CLS450 Engine Oil Capacity is 8.5 liters (9.0 quarts). Mercedes-Benz recommends using an engine oil with the specification Mercedes-Benz 256.930.
Table of contents
Mercedes-Benz CLS 450 C257 Engine Oil Capacity
2023 Mercedes-Benz CLS 450 Engine Oil Capacity
The Mercedes Benz CLS 450 holds 9 quarts of 0W-20 or 0W-30 oil.
Engine
3.0L Turbo 256.930
Engine Oil Capacity with filter
9 qt (8.5 l)
Oil type
0W-20, 0W-30, 0W-40
Drain plug torque
Firmly fit the connector by hand until it locks and engages.
2019 Mercedes-Benz CLS 450 Differential And Transfer Case Fluid Capacity
Type
Fluid capacity
Fluid type
Front differential
1.3 pints (0.6 liters)
GLS49
183 mm Rear differential
1.7 pints (0.8 liters)
GLSB0
197 mm Rear differential
1.9 pints (0.9 liters)
GLSB0
205 mm Rear differential
2.1 pints (1 liter)
GLSB0
Transfer case
1.5 pints (0.7 liters)
SL058
2019 Mercedes-Benz CLS 450 Coolant Capacity
Engine
Coolant capacity
LTCC
Initial fill 3.2 quarts (3 liters)
HTCC
Initial fill 12.7 quarts (12 liters)
What is the Difference between Synthetic Blend Oil vs Full Synthetic Oil?
Synthetic blend oils are chemically identical to full synthetic motor oils, yet they have similar properties. Learn more about the advantages of synthetic blend motor oil at Mercedes-Benz of Chesterfield serving St Louis! Synthetic blends have fewer impurities than synthetic mixes, but they still maintain their performance in extreme heat and resist oxidation.
Synthetic blends are an excellent option for drivers who put a lot of strain on their engines and engage in activities like towing heavy trailers, hauling, or off-roading. You might wonder what the difference between synthetic blend oil and wholly synthetic oil is. Synthetic blend oils contain a combination of both synthetic and conventional base oils as well as additives.
Can You Mix Conventional Oil & Synthetic Motor Oil?
For a few crucial reasons, combining different sorts of oils is not suggested at all. Motor oils are primarily made up of base oils with additives added. For example, full synthetic oils are designed to remove most impurities while including the greatest possible additives.
Dan is a co-founder of Engineswork. He knows everything about internal combustion engines. Ask your questions in comments down below this article - he will be glad to help you anytime.
