The heart of your 2018 Jeep Compass, the 2.4L Tigershark MultiAir II engine, roars with life each time you turn the ignition. It’s a testament to engineering excellence, a marvel of power and performance that sets the Compass apart from its peers. But like any finely-tuned machine, it needs the right fuel to function at its best. That’s where the correct oil type comes in.
Think of your Jeep Compass as a high-performance athlete. Just as a runner fuels their body with the right nutrients to maximize performance and longevity, your Compass requires the proper oil type to ensure optimal function and longevity. But, the world of engine oils can be complex and confusing. There are various types, grades, and brands, each promising to be the best for your vehicle. So, how do you know which one is truly the best for your 2018 Jeep Compass?
That’s what this article is for. We have delved into the depths of your vehicle owner’s manual to bring you the definitive guide on the best oil for your Compass. We’re cutting through the marketing jargon and technical terms to give you clear, straightforward advice.
– The oil capacity for this engine is 5.5 qt. (5.2 liters).
– Use a Mopar Engine Oil Filter or equivalent for optimal engine health and performance.
– The oil change intervals should not exceed 10,000 miles, twelve months, or 350 hours of engine run time.
– t’s crucial to use API Certified engine oils to maintain engine health and longevity.
– The use of chemical flushes in the engine oil is discouraged due to potential engine damage, which is not covered by the New Vehicle Limited Warranty.
– The proper disposal of used engine oil and filters is essential to protect the environment.
What Kind Of Oil Does A Jeep Compass 2.4 Take?
The recommended oil for your Compass’s engine is the SAE 0W-20 API Certified Engine Oil. This isn’t just a suggestion, but a specification derived from extensive testing and research by the vehicle’s manufacturer, Fiat Chrysler Automobiles (FCA). The oil meets the stringent requirements of the FCA Material Standard MS-6395, ensuring it delivers optimal performance and protection for your engine.
But what does SAE 0W-20 mean? The Society of Automotive Engineers (SAE) is the body that sets the standards for oil viscosity, which is a measure of how easily the oil flows at different temperatures. ‘0W’ means the oil flows well at low temperatures, ensuring your engine is adequately lubricated during cold starts. ’20’ means the oil maintains its protective properties at high engine operating temperatures. Together, this means the oil provides year-round protection for your engine, irrespective of the season or climate.
API certification, on the other hand, is an assurance of quality and performance. The American Petroleum Institute (API) is an industry body that sets standards for motor oils. An API-certified oil has passed rigorous tests and meets high performance, efficiency, and emission standards.
Using the right engine oil is like giving your Jeep Compass the best possible nutrition. It enables your engine to perform its best, extends its life, and keeps your Compass running smoothly and efficiently. So, when it’s time for an oil change, remember to choose the SAE 0W-20 API Certified Engine Oil that meets the FCA Material Standard MS-6395.
Best Motor Oil For 2018 Jeep Compass
Just as important as the oil type is the brand of oil you choose. Not all oils are created equal, and the quality can vary significantly between different brands. For the 2018 Jeep Compass 2.4L engine, three brands stand out for their compatibility and performance: Mopar, Pennzoil, and Shell Helix. These brands have earned their reputation by consistently delivering high-quality products that meet or exceed the required standards.
- Full synthetic SAE OW-20 Mopar motor oil
Your Jeep Compass 2.4L engine has an oil capacity of 5.5 quarts (5.2 liters). This is the amount of oil needed to keep your engine running smoothly. It’s essential to adhere to this measurement to avoid overfilling or underfilling, which can lead to engine problems.
- Full synthetic 0W-20 engine oil that is made with natural gas and designed for complete protection for top engine performance
- Helps extend engine life and protects for up to 15 years or 500,000 miles, whichever comes first. Guaranteed* (see Warranty Information in Product Description).
- Provides better fuel economy (based on the latest industry standards)
- Pennzoil Platinum 0W-20 keeps pistons up to 45% cleaner than the toughest industry standard (based on Sequence IIIH results)
- Full synthetic 0W-20 engine oil with PurePlus Technology that is race trusted for extreme engine performance and is made with natural gas.
- Pennzoil Ultra Platinum comes with warranty coverage of up to 15 years or 500,000 miles, whichever comes first. Guaranteed* (see Warranty Information in Product Description).
- No other leading motor oil provides better wear protection from friction (based on Sequence IVA wear test using SAE 5W-30)
- Far exceeds the most stringent car manufacturer requirements for cleanliness and protection (based on ILSAC GF-6)
Always refer to the engine oil filler cap for the correct SAE grade. This is a simple but crucial step to ensure you are using the right oil for your engine. The filler cap is usually marked with the recommended oil viscosity.
The importance of using the recommended oil cannot be overstated. Using the right oil ensures optimal engine performance, better fuel efficiency, and a longer engine life. It also prevents possible engine damage that may not be covered by the vehicle warranty.
When it comes to the engine oil filter, the manufacturer recommends using a Mopar Engine Oil Filter or its equivalent. The role of the oil filter is to remove impurities and contaminants from the engine oil to prevent them from getting into the engine. This keeps your engine clean and ensures it performs optimally.
Using high-quality filters is essential as they are more efficient at trapping and holding contaminants. Low-quality filters may not filter out all the contaminants and may also not last as long as high-quality ones.
Lastly, your Jeep Compass uses a full-flow type oil filter. This type of filter allows the full flow of oil to pass through the filter at all times. This ensures continuous filtration and a constant supply of clean oil to your engine.
Engine Oil Selection
Selecting the right engine oil for your 2018 Jeep Compass isn’t just about picking the right viscosity. It’s also about ensuring that the oil you use has the necessary certifications to provide the best possible protection for your engine.
The American Petroleum Institute (API) is a key body in this regard. API certification guarantees that engine oil meets specific standards for performance, efficiency, and safety. Jeep strongly recommends using API Certified engine oils, as these oils have been independently tested to meet rigorous standards.
The API Engine Oil Identification Symbol is an easy way to identify these certified oils. This symbol, which resembles a donut, is typically found on the back of the engine oil container. The top half of the symbol indicates the oil’s performance level, the center identifies the oil’s viscosity, and the lower half tells you whether the oil has energy-conserving properties.
In the case of the 2018 Jeep Compass with the 2.4L Tigershark MultiAir II Engine, the recommended oil is Mopar SAE 0W-20 engine oil, which is approved by FCA Material Standard MS-6395. This oil carries the API Certification, ensuring it meets the highest standards of performance and protection for your engine.
In essence, selecting an API-certified oil isn’t just a recommendation—it’s a crucial step in maintaining the performance, efficiency, and longevity of your Jeep Compass’s engine.
Engine Oil Change Intervals
Maintaining the right engine oil change intervals is crucial for the overall health and longevity of your engine. As oil circulates through the engine, it gradually degrades, and its lubricating properties diminish. Timely oil changes ensure that your engine is always lubricated with high-quality oil, reducing wear and tear and enhancing performance.
The “Scheduled Servicing” section in your vehicle’s manual provides detailed information on the correct maintenance intervals. It’s highly recommended to follow this schedule for optimal vehicle performance and to avoid potential engine damage.
However, as a general rule, you should not exceed oil change intervals of 10,000 miles (16,000 km), twelve months, or 350 hours of engine run time, whichever comes first. These are the maximum limits; exceeding them can lead to accelerated engine wear and other problems.
These intervals are more than just arbitrary numbers. They are based on extensive research and real-world testing to ensure that your engine gets the best possible care. So, sticking to these intervals is not just good for your vehicle, but it’s also a smart move for your wallet in the long run.
Caution Against the Use of Chemical Flushes
The engine of your 2018 Jeep Compass isn’t just a machine—it’s the heart of your vehicle. It’s critical that it’s treated with care to ensure optimal performance and longevity. This is why it’s important to understand the potential risks of using chemical flushes in your engine oil.
Chemical flushes, while marketed as a quick fix to clean your engine and improve its performance, can actually cause more harm than good. These substances are harsh and can strip away the essential lubricating properties of your engine oil. This can lead to increased friction, causing wear and tear and potentially severe engine damage over time.
What’s more, any damage caused by the use of chemical flushes in your engine oil isn’t covered by the New Vehicle Limited Warranty. This means that the cost of any repairs necessary due to such damage will be your responsibility.
In conclusion, while it may be tempting to use a chemical flush in an attempt to improve your engine’s performance, the potential risks far outweigh the benefits. It’s always best to stick to the manufacturer’s recommendations for engine care to ensure the longevity and performance of your Jeep Compass.
Your 2018 Jeep Compass is more than just a vehicle; it’s a symbol of adventure, freedom, and the spirit of exploration. Taking care of its 2.4L Tigershark MultiAir II Engine is not just about maintaining its performance – it’s about preserving these values. The right oil—SAE 0W-20 API Certified Engine Oil—coupled with a high-quality Mopar Engine Oil Filter can keep your engine running smoothly, ensuring countless journeys on the road less traveled.
Remember, the oil change intervals shouldn’t exceed 10,000 miles, twelve months, or 350 hours of engine run time. Following this regimen will ensure your engine stays in peak condition, ready to tackle any adventure that lies ahead.
Lastly, as much as we love our journeys, we must not forget our responsibility towards the environment. Properly disposing of used engine oil and filters is an imperative step in reducing our carbon footprint and preserving the wild terrains we so love to explore. After all, the spirit of a Jeep is not just about exploring the world but also protecting it.
The information provided in this article is intended for informational and educational purposes only and should not be construed as professional mechanical advice. While the author has made every effort to ensure the accuracy and completeness of the information in this article, we make no warranties or representations as to the accuracy, completeness, reliability, or suitability of the information provided.
Engineswork.com participates in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. As an Amazon Associate, we earn from qualifying purchases.
Last update on 2024-02-28 / Affiliate links / Images from Amazon Product Advertising API