| Year | Category | Engine Type | Fluid Capacity & Type | Additional Info |
|---|---|---|---|---|
| 2020 | Engine Oil | 3.8L 6-cyl engine | 6.9 quarts (6.5 liters) | 5W-30, 10W-30 |
| Oil drain plug torque: 25-33 ft/lbs | ||||
| Coolant | 3.8L 6-cyl engine | Initial fill 9.4 quarts (8.9 liters) | ||
| Transmission Fluid | 8-speed A8LF1 | Total Fill 7.4 quarts (7 liters) | Fluid type: SL043 | |
| Rear Differential Fluid | 1.5 pints (0.7 liters) | 75W-85 GL-5 | ||
| Transfer Case Lubricant | 1.5 pints (0.7 liters) | 75W-85 GL-5 | ||
| Brake Fluid | 3.8L 6-cyl engine | FMVSS116 DOT-4 | ||
| 2021 | Engine Oil | 3.8L 6-cyl engine | 6.9 quarts (6.5 liters) | 5W-30, 10W-30 |
| Oil drain plug torque: 25-33 ft/lbs | ||||
| Coolant | 3.8L 6-cyl engine | Initial fill 9.4 quarts (8.9 liters) | ||
| Transmission Fluid | 8-speed A8LF1 | Total Fill 7.4 quarts (7 liters) | Fluid type: SL043 | |
| Rear Differential Fluid | 1.5 pints (0.7 liters) | 75W-85 GL-5 | ||
| Transfer Case Lubricant | 1.5 pints (0.7 liters) | 75W-85 GL-5 | ||
| Brake Fluid | 3.8L 6-cyl engine | FMVSS116 DOT-4 | ||
| 2022 | Engine Oil | 3.8L 6-cyl engine | 6.9 quarts (6.5 liters) | 5W-30, 10W-30 |
| Oil drain plug torque: 25-33 ft/lbs | ||||
| Coolant | 3.8L 6-cyl engine | Initial fill 9.4 quarts (8.9 liters) | ||
| Transmission Fluid | 8-speed A8LF1 | Total Fill 7.4 quarts (7 liters) | Fluid type: SL043 | |
| Rear Differential Fluid | 1.5 pints (0.7 liters) | 75W-85 GL-5 | ||
| Transfer Case Lubricant | 1.5 pints (0.7 liters) | 75W-85 GL-5 | ||
| Brake Fluid | 3.8L 6-cyl engine | FMVSS116 DOT-4 |
The Hyundai Palisade is a great vehicle for families. It’s roomy and comfortable, and it has a lot of great features. If you’re the type of person who likes to care for their car, you’ll want to know about the oil capacities for the Hyundai Palisade.
In this article, we will discuss the oil capacities of the 3.8-liter engine. We’ll also talk about how to check your oil levels and what to do if you run out of oil.
How Much Oil Does A Hyundai Palisade Take?
The 3.8L Hyundai Palisade takes 6.9 quarts of SAE 5W-30 and SAE 10W-30 oil. There are a number of factors that need to be considered when figuring out what type of best motor oil for Hyundai Palisade you should get.
Hyundai Palisade has been on the market for just a few years, yet it is already becoming quite popular. Consumers appreciate how spacious, simple to use, and nimble the Hyundai Palisade is. Because of this, your Hyundai Palisade’s oil must be changed on a regular basis (typically every three months or 3,000 miles).
Today, “conventional” simply refers to a synthetic blend. These days, it’s becoming more unusual to find pure dinosaur juice, as far as my knowledge goes. In addition, contemporary “standard” oils are quite excellent. Conventional is perfectly adequate unless you need a premium full synthetic (such as high-performance automobiles). A decent modern conventional oil may potentially endure up to 10,000 miles in certain applications (unfortunately not our cars; see below).
Because of how GDI engines work, changing your oil more frequently is preferable (synthetic or not) than using a “higher-quality” oil and extending your changes. Even if the oil still has “life” in it, GDI motors cause fuel dilution due to combining conventional or synthetic oils.
Even if a condition is described as “severe,” most people would be placed in the “extremely severe” category for driving. Unless you reside in Fantasy Utopia Land and drive at constant speeds all of the time, make extended trips when you start your car, etc., the vast majority of individuals will fall under the “extremely severe” driving category. It may be beneficial to you in the long run if you consider operating with a lower OCI than 7500 miles, depending on your situation.
