Mazda | Page 2 of 2 | Engineswork and Specs

All moving points of the body, such as door and hood hinges and locks, should be lubricated each time the engine oil is changed. Use a nonfreezing lubricant on locks during cold weather. Make sure the hood's secondary latch keeps the hood from opening when the primary latch is released. 2003 2004 2005 2006 2007 Mazda 3 Oil Capacity Engine Capacity Oil type (recommended) 2.0L 4-cyl Engine With oil filter replacement 4.3 L (4.5 US qt, 3.8 Imp qt) SAE 5W-20 2.0L 4-cyl Engine Without oil filter replacement 3.9 L (4.1 US qt, 3.4 Imp qt) 2.3L 4-cyl Engine 2260cc With oil filter 4.3 L (4.5 quarts) SAE 5W-20 Maintenance interval: every 6 months or 12 000 km (7 500 miles). 2008 2009 2010 2011 2012 Mazda 3 Oil Capacity Engine Oil capacity with oil filter Oil type (recommended) 2.0-liter engine 4.3 L (4.5 US qt, 3.8 Imp qt) SAE 5W-20 2.5-liter engine 5.0 L (5.3 US qt, 4.4 Imp qt) SAE 5W-20 Maintenance interval: every 6 months or 12 000 km (7 500 miles). 2013 2014 2015 2016 2017 2018 Mazda 3 Oil Capacity Engine Oil capacity with oil filter Oil type (recommended) SKYACTIV-G 2.0 4.2 L (4.4 US qt, 3.7 Imp qt) SAE 5W-30, 0W-20 SKYACTIV-G 2.5 4.5 L (4.8 US qt, 4.0 Imp qt) SAE 5W-30, 0W-20 The oil replacement period can be selected from the flexible setting or fixed setting, or it can be set to non-display. The flexible setting is available only in the United States and Puerto Rico. Once engine oil flexible maintenance is selected, the vehicle calculates the remaining oil life based on the engine operating conditions. The vehicle lets you know when an oil change is due by illuminating the wrench indicator light in the instrument cluster. 2019 2020 2021 Mazda 3 Oil Capacity Engine Oil capacity with oil filter Oil type (recommended) SKYACTIV-G 2.5 4.5 L (4.8 US qt, 4.0 Imp qt) SAE 0W-20, SAE 5W-30 SKYACTIV-G 2.0 4.2 L (4.4 US qt, 3.7 Imp qt) SAE 0W-20, SAE 5W-30 How Much Oil Does a Mazda 3 Take The 2021 Mazda 3 with the 2.0L 4 -cyl engine takes 4.4 quarts (with filter) of 0W-20 synthetic oil. The Mazda 3 with a 2.0L 4-cyl engine takes 4.8 quarts (with filter) of 0W-20 synthetic oil. A new oil filter and a crush washer are required. MAZDA SUPRA 0W20 MAZDA SUPRA 0W20 engine oil was developed by TOTAL in cooperation with the car manufacturer, especially for Skyactiv gasoline engines. It differs from conventional oils by its high fluidity, therefore providing lower fuel consumption and facilitating cold engine start in freezing weather. MAZDA SUPRA 0W20 oil has protective properties and energy efficiency level of API SN and ILSAC GF-5 according to the international classification. The automaker recommends this oil for gasoline Mazda models 2 (DE, DJ), 3 (except MPS) and 6 (except MPS). MAZDA ULTRA 5W30 For Mazda 2, 3 and 6 models with gasoline and diesel engines, except for cars with a particulate filter (DPF), was designed the engine oil MAZDA ULTRA 5W30, having ACEA A5/B5 and API SL/CF qualities. It guarantees reliable engine protection against wear and harmful deposits even in hard conditions, such as sport driving, city driving in the start-stop mode and cold starting. This oil's resistance to oxidation maintains its effectiveness throughout the interval between replacements. MAZDA ULTRA 5W30 is recommended by the automaker for the Mazda 3 MPS and 6 MPS with a 2.3 Turbo engine. MAZDA ULTRA DPF 5W30 MAZDA ULTRA DPF 5W30 engine oil is designed for diesel automobiles equipped with diesel particulate filters (DPF), which require oils of Low SAPS category with reduced content of sulfated ash, phosphorus and sulfur. It guarantees the effective operation of the aftertreatment systems and prevents premature failure. The level of antiwear and energy-saving properties of MAZDA ULTRA DPF 5W30 oil meets the ACEA C2 standard.